Assembly Overview: Notes
WARNING: This page is about a different variant/trim than selected.
1 - Housing cover
- Modifications and distinguishing features
2 - Piston
- For pressure accumulator for brake "B2"
3 - Spring
4 - Cover
5 - Seal
- Insert with ATF
6 - Retaining ring
7 - Thrust washer
- Attach in housing cover with petroleum jelly (e.g. Vaseline)
8 - Outer seal
- For B2 piston
- Insert with ATF
- 2 items with different diameters are included in clutch plate repair kit for brake B2
- Installation position
9 - Inner seal
- For B2 piston
- Insert with ATF
- 2 items are included in the clutch plate repair kit for brake B2
- Installation position
10 - B2 piston
- Piston diameter modified
- Remove from and insert in cover by hand