Housing Cover And Seals For Piston For Brake "B2"
WARNING: This page is about a different variant/trim than selected.
Fig 1: Attention (Two Pairs Of Seals For Piston Of "B2" Are Included In Repair Kit "Clutch Plate Set For Brake B2" Electronic Parts Catalog "ETKA"
Two pairs of seals for piston of "B2" are included in repair kit "clutch plate set for brake B2" Electronic Parts Catalog "ETKA".
The pairs of seals are colored coded to identify them.
Each pair consists of an inner and an outer seal.
Which pair must be installed depends on identification - arrow - on transmission cover.
Fig 3: If Transmission Cover Has The Identification "PW001", The Seals With White Marks Must Be Installed
- If transmission cover has the identification "PW001" - arrow - , the seals with white marks must be installed.
- If the transmission cover has no identification, the seals with yellow marks must be installed.
Installation position of seals