Multi-Function Transmission Range (TR) Switch F125, Removing
WARNING: This page is about a different variant/trim than selected.
- First check whether a coded radio is installed. If so, obtain anti-theft code.
- With ignition switched off, disconnect battery Ground (GND) strap.
- Remove battery and battery tray → - Repair Group 27.
- Shift selector lever to "P".
- Remove selector lever cable, refer to Selector lever cable, removing and installing .
- Remove nut - arrow -.
- Pull lever - 1 - off selector shaft.
- Disconnect connector - 2 - off wire for multifunction switch.
- Remove Multi-Function Transmission Range (TR) Switch F125 - 3 -.