Removing ATF Cooler

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Air Cleaner Assembly

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove intake hose - 1 - , connector - 2 - and hose - 3 - from Mass Air Flow Sensor.
Remove complete air filter housing.

Fig 2: Identifying Clamp On ATF Cooler Hoses

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Clamp off ATF cooler hoses with Hose Clamps Up to 25 mm dia. 3094 and detach from ATF cooler.

Fig 3: Removing ATF Cooler From Transmission

Courtesy of VOLKSWAGEN UNITED STATES, INC.