VAG 1551 Scan Tool, connecting and selecting functions
WARNING: This page is about a different variant/trim than selected.
Additional information
- 5 SPD. AUTOMATIC TRANSMISSION 09A
- Electrical Wiring Diagrams, Troubleshooting & Component Locations binder
- V.A.G 1551 Scan Tool operating instructions
Connecting Scan Tool
- Remove Data Link Connector (DLC) cover -1-.
- With ignition switched off, connect V.A.G 1551 with diagnosis cable V.A.G 1551/3A.
Indicated on display
| V.A.G - On Board Diagnostic HELP 1 - Rapid data transfer1) 2 - Blink code output1) |
1) appears alternately
NOTE:
- Additional operating instructions can be called up by pressing the HELP key of V.A.G 1551.
- The → key is used for advancing within the program sequence.
Refer to V.A.G 1551 Scan Tool operating instructions.