List of selectable functions
WARNING: This page is about a different variant/trim than selected.
| Reference | ||
| 01 - | Check control module version. Refer to Performing On Board Diagnostic (OBD) | On Board Diagnostic (OBD) |
| 02 - | Check Diagnostic Code (DTC) memory | Diagnostic Trouble Code (DTC) memory, checking |
| 04 - | Initiate basic setting | Basic setting, initiating |
| 05 - | Erase DTC memory | Diagnostic Trouble Code (DTC) memory, erasing |
| 06 - | End output | |
| 08 - | Read measured value block | Measured value block, reading |
Further functions, which can be printed out by pressing the HELP key, need not be considered.
After checking a function the V.A.G 1551 returns to the following start position:
Indicated on display
| Rapid data transfer HELP Select function XX |