Cooling system, draining and filling: Draining
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Hot steam may escape when opening expansion tank. Wear protective goggles and protective clothing to prevent damage to eyes and scalding. Cover the cap with a rag and open very carefully.
- Open cap for coolant expansion tank.
- Remove sound insulation tray, refer to NOISE INSULATION (GASOLINE ENGINES), ASSEMBLY OVERVIEW or NOISE INSULATION (DIESEL ENGINES), ASSEMBLY OVERVIEW .
- Remove drain plug - arrow - to drain coolant from radiator.
- In addition, to drain coolant from engine, disconnect coolant hose at oil cooler - arrow -.
NOTE:
- Observe disposal regulations!