Valve seats, refacing: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools, testers and auxiliary items required

NOTE:

When repairing engines with leaking valves, it is not sufficient to reface or replace valve seats and valves. It is also necessary to check the valve guides for wear. This is particularly important on high mileage engines refer to Valve guides, checking .
Only reface valve seats enough until a perfect contact pattern is obtained. The maximum permissible refacing dimension must be calculated before work is carried out. If the reworking dimension is exceeded, the function of the hydraulic lifters can no longer be guaranteed and therefore the cylinder head should be replaced.