LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI VR6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (1.8L - Engine Mechanical, Engine Code(S): AWD, AWW, AWP (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Piston and connecting rod >> Pistons and connecting rods (engine code AWD, AWW), assembly overview >> Bearing shells - installed positions

Bearing shells - installed positions

WARNING: This page is about a different variant/trim than selected.
Fig 1: Installation Position Of Bearing Shells
GW00000055Courtesy of VOLKSWAGEN UNITED STATES, INC.

Bearing shell - 1  - with oil bore - arrow  - for connecting rod.

Bearing shell - 2  - without oil bore for connecting rod cover.

Dimension - a  - must be the same at left and right. Max. deviation: 0.2 mm

scientia non olet · About LEMON Manuals