Valve guides, checking

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying VW 387 Universal Dial Gauge Bracket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Dial gauge holder VW 387
Dial gauge

Test sequence

Fig 2: Identifying Special Tool - VW 387 Installed

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert new valve into guide. The end of the valve stem must be flush with the end of the guide

NOTE:

Due to the slight difference in stem dimensions, ensure that only an intake valve is used in the intake guide and an exhaust valve in the exhaust guide.

Tilt clearance: maximum 1.3 mm