Test sequence
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Place a load on toothed belt with strong thumb pressure. Notch and protrusion - arrow - must be shifted.
- Release load on toothed belt again. The tensioning roller must return to its initial position. (Notch and protrusion are aligned again.)
NOTE:
- After releasing tension, the tensioning roller does not return to its initial position.