LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI VR6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (1.9L - TDI Engine Mechanical - ALH (A4 Platform)) >> 10 - Engine - Assembly >> Engine, removing and installing >> Engine and transmission mounts, aligning

Engine and transmission mounts, aligning

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before loosening bolts, secure assembly using engine support bridge 10-222A.

Engine mount assembly 

a = 14.0 mm

b = minimum 10.0 mm

Fig 1: Identifying Transmission Mount Bolts & Measurements
GW00000014Courtesy of VOLKSWAGEN UNITED STATES, INC.

Both bolt heads - 1  - must be flush with edge - c  -.

Transmission mount assembly 

Fig 2: Identifying Engine & Transmission Mounts Alignment Edges
GW00000431Courtesy of VOLKSWAGEN UNITED STATES, INC.

Edges - a  - and - b  - must be parallel to each other.

scientia non olet · About LEMON Manuals