Transmission Control Module (TCM) -J217- 68-pin connector assignment (on VAG 1598/18)

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

TRANSMISSION CONTROL PIN CONNECTOR ASSIGNMENT

Terminal

Assignment

Ground (terminal 3⁽¹⁾

2, 3, 4

Vacant

Throttle Position (TP) Sensor -G69- signal ⁽¹⁾

Transmission Fluid Temperature Sensor -G93-

7, 8

Vacant

Solenoid Valve 3 -N90-

10-

Solenoid Valve 7 -N94-

11-

Park/neutral signal

12-

Kickdown for air conditioner

13-

Ignition timing influence

14-

Vacant

15-

Brake Light Switch -F- signal voltage

16-

Kick Down Switch -F8-

17-

Vacant

18-

Multi -function TR Switch -F125-

19-

TD (revolution) signal

20-

Vehicle Speed Sensor (VSS) -G68-

21-

Transmission Vehicle Speed Sensor -G38-

22-

Solenoid Valve 6 -N93- supply voltage

23-

Supply voltage (B+) (terminal 15)

24-

OBD K-wire

25-

Vacant

26-

Vacant

27-

Vacant

28-

Throttle Position (TP) Sensor -G69 Ground⁽¹⁾

29-

Shift Lock Solenoid -N110-

30 To 35

Vacant

36-

Diagnosis L -wire

37 To 39

Vacant

40 -

Multi-function TR Switch -F125-

41 -

Load signal from Engine Control Module (ECM)

42 -

Diesel engine revolution sensor (screening)

43 -

Vehicle Speed Sensor (VSS) -G68- (shielding)

44 -

Transmission Vehicle Speed Sensor (VSS) -G38- (shielding)

45 -

Supply voltage (terminal 30)

46 -

Vacant

47 -

Solenoid Valve 4 -N91-

48 & 49

Vacant

50 -

Throttle Position (TP) Sensor -G69- (5 volt) ⁽¹⁾

51 To 53

Vacant

54-

Solenoid Valve 2 -N89-

55-

Solenoid Valve 1 -N88-

56-

Solenoid Valve 5 -N92-

57-

Selector lever display

58-

Solenoid Valve 6 -N93-

59-

Vacant

60-

Cruise control system (input terminal 15)
05/95 Vacant 05/95

61-

Cruise control system (output)

62-

Multi -function TR Switch -F125-

63-

Multi -function TR Switch -F125-

64-

Engine Speed (RPM) Sensor -G28- (Diesel engine)

65-

Vehicle Speed Sensor (VSS) -G68-

66-

Transmission Vehicle Speed Sensor (VSS) - G38-

67-

Solenoid valves voltage supply

68-

Terminal 30 (output)

⁽¹⁾

Voltage supply and signal (contacts 50, 28 + 5) not assigned on vehicles with 6-cylinder engine or Diesel engine; Signal (contact 41) directed via Engine Control Module (ECM) to Transmission Control Module (TCM) and can only be checked in "Read measuring value block": see READ MEASURING VALUE BLOCK (FUNCTION 08) .