Position of selector elements
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
The POSITION OF SELECTOR ELEMENTS table shows which selector elements are operated in individual ranges to help you troubleshoot poor acceleration and speed performance or with drive train malfunctions in general. The table should help you determine which selector elements are not operating properly.
All gears are shifted hydraulically.
All forward gears are driven mechanically at a predetermined load and speed via torque converter lockup clutch.
POSITION OF SELECTOR ELEMENTS
| Gear | B1 | B2 | K1 | K2 | K3 | F | LC |
|---|---|---|---|---|---|---|---|
| R | X | X | |||||
| 1H | X | X | |||||
| 1M | X | X | X | ||||
| 2H | X | X | |||||
| 2M | X | X | X | ||||
| 3H | X | X | |||||
| 3M | X | X | X | ||||
| 4H | X | X | |||||
| 4M | X | X | X |
X = clutches, brakes or free wheel engaged
H = hydraulic
M = mechanical