Shift lock solenoid -N110-, adjusting clearance between pressure rod and lever
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Dimension a = 0.3mm
Functional check
- Shift selector lever to "P" and supply solenoid with 12V. It must not be possible to shift lever into a driving gear.
- Interrupt solenoid operation. It must not be possible to shift into all driving gears. Pressure rod must not catch on lever.
- Shift selector lever into "N"and supply solenoid with 12V. It must not be possible to shift lever into a driving gear.
- After adjusting clearance, install assembled selector lever.