Over-center spring, removing and installing: Installing
WARNING: This page is about a different car, the 1999 Volkswagen GTI, 1998 Volkswagen GTI, 1997 Volkswagen GTI, 1996 Volkswagen GTI, and 1995 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. While doing so, note the following:
- When installing over-center spring, locate relay plate in its left mounting.
- Pull clutch pedal into passenger compartment.
- Guide over-center spring between clutch pedal and mounting/relay plate holder until it is in position in the mounting bracket -arrow 1- and located directly below clutch pedal mounting lug -arrow 2-.
- Press over-center spring onto mounting lug on pedal support, operating clutch pedal.