Cooling system components, engine side
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
The following list pertains to Fig 1.
- To upper radiator
- See COOLING SYSTEM COMPONENTS, BODY SIDE , item - 7 -
- O-ring
- Always replace
- Coolant pump
- Disassembling and assembling, see COOLANT PUMP, DISASSEMBLING AND ASSEMBLING
- Clip
- Engine Coolant Temperature (ECT) sensor -G62-
- With Engine Coolant Temperature (ECT) sensor -G2-
- From expansion tank
- See COOLING SYSTEM COMPONENTS, BODY SIDE , item - 6 -
- Connector flange
- To heater core
- From expansion tank
- For vehicles with automatic transmission, see 14
- 10 Nm (7 ft lb)
- Bracket
- From heater core
- From expansion tank (manual trans.) or ATF cooler (automatic trans.)
- Coolant pipe
- Oil cooler
- Removing and installing, see LUBRICATION SYSTEM, COMPONENTS
- From lower radiator
- See 8
- 20 Nm (15 ft lb) plus 1/4 turn (90°)
- Always replace
- Generator (GEN) bracket
- 30 Nm (22 ft lb)
- Ribbed belt
- Removing and installing, see RIBBED BELT, REMOVING AND INSTALLING .