Cruise control vacuum pump -V18-, removing and installing
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Remove battery, refer to BATTERY, REMOVING AND INSTALLING .
- Remove windshield washer fluid reservoir.
- Separate 3-pin connector.
- Remove nut -1-.
- Press securing plate with vacuum pump in direction of arrow and remove.
- Remove vacuum hose from vacuum pump.
Install in reverse order of removal.