LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI VR6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (4 SPD. Automatic Transmission 01M (A4 Platform)) >> 39 Final drive, Differential >> Final drive, disassembling and assembling >> Drive pinion, removing and installing >> Removing and installing bearing supporting ring

Removing and installing bearing supporting ring

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 Volkswagen Golf, 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2004 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing And Installing Bearing Supporting Ring Using Special Tool 3183A & Torque Wrench
GW00002290Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Torque wrench

scientia non olet · About LEMON Manuals