LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI VR6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (4 SPD. Automatic Transmission 01M (A4 Platform)) >> 39 Final drive, Differential >> Final drive, adjusting >> Drive pinion, adjusting >> Table of shims for drive pinion and input gear

Table of shims for drive pinion and input gear

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 Volkswagen Golf, 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2004 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Gauged
thickness (mm)		 Shim to be
fitted (mm)		 Gauged
thickness (mm)		 Shim to be
fitted (mm)		 Gauged
thickness (mm)		 Shim to be
fitted (mm)
0.975... 0.999
1.000... 1.024
1.025... 1.049
1.050... 1.074
1.075... 1.099
1.100... 1.124
1.125... 1.149
1.150... 1.174
1.175... 1.199
1.200... 1.224
1.225... 1.249
1.250... 1.274
1.275... 1.299
1.300... 1.324
1.325... 1.349
1.350... 1.374
1.375... 1.399
1.400... 1.424
1.425... 1.449
1.450... 1.474
1.475... 1.499
1.500... 1.524
1.525... 1.549		 1.000
1.025
1.050
1.075
1.100
1.125
1.150
1.175
1.200
1.225
1.250
1.275
1.300
1.325
1.350
1.375
1.400
1.425
1.450
1.475
1.500
1.525
1.550		 1.550... 1.574
1.575... 1.599
1.600... 1.624
1.625... 1.649
1.650... 1.674
1.675... 1.699
1.700... 1.724
1.725... 1.749
1.750... 1.774
1.775... 1.799
1.800... 1.824
1.825... 1.849
1.850... 1.874
1.875... 1.899
1.900... 1.924
1.925... 1.949
1.950... 1.974
1.975... 1.999
2.000... 2.024
2.025... 2.049
2.050... 2.074
2.075... 2.099
2.100... 2.124		 1.575
1.600
1.625
1.650
1.675
1.700
1.725
1.750
1.775
1.800
1.825
1.850
1.875
1.900
1.925
1.950
1.975
2.000
2.025
2.050
2.075
2.100
2.125		 2.125... 2.149
2.150... 2.174
2.175... 2.199
2.200... 2.224
2.225... 2.249
2.250... 2.274
2.275... 2.299
2.230... 2.324
2.325... 2.349
2.350... 2.374
2.375... 2.399
2.400... 2.424
2.425... 2.449
2.450... 2.474
2.475... 2.499
2.500... 2.524
2.525... 2.549
2.550... 2.574
2.575... 2.599
2.600... 2.624
2.625... 2.649
2.650... 2.674
2.675... 2.700		 2.150
2.175
2.200
2.225
2.250
2.275
2.300
2.325
2.350
2.375
2.400
2.425
2.450
2.475
2.500
2.525
2.550
2.575
2.600
2.625
2.650
2.675
2.700

Different tolerances enable the required shim thickness to be measured precisely.

Part number:

Refer to Parts catalog

scientia non olet · About LEMON Manuals