Table of shims
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 Volkswagen Golf, 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2004 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
| Indicator reading (mm) | Shims (mm) |
| 1.26... 1.35 1.36... 1.45 1.46... 1.55 |
1.0 1.1 1.2 |
| 1.56... 1.65 1.66... 1.75 1.76... 1.85 |
1.3 1.4 1.5 |
| 1.86... 1.95 1.96... 2.05 2.06... 2.15 |
1.6 1.7 1.8 |
| 2.16... 2.25 2.26... 2.35 2.36... 2.45 |
1.9 2.0 2.1 |
| 2.46... 2.55 2.56... 2.65 2.66... 2.75 |
2.2 2.3 2.4 |
| 2.76... 2.85 2.86... 2.95 2.96... 3.05 |
2.5 2.6 2.7 |
| 3.06... 3.15 3.16... 3.25 |
2.8 2.9 |
Example:
Measured value 2.00 mm =
Insert 1.7 mm thick shim.
- Remove small input shaft bolt.
- Insert correct shim -3- on small input shaft (arrow).
- Tighten small input shaft bolt -1- with washer -2-.
Tightening torque 30 Nm.
- Perform planet carrier check measurement. Refer to Planet carrier check measurement .