Calculating dimension "a"
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 Volkswagen Golf, 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, and 2004 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble planetary gearbox up to last -B2- inner plate. Refer to Assembling planetary gearbox . Last outer plate and shim are not installed.
- Place retaining ring with smooth side onto last inner plate.
- Place 3459 onto retaining ring and turn so that 3 clips align with 3 holes for ATF pump.
- Bolt 3459 to flange for ATF pump with 5 Nm.
The plate packet for -B2- is now pressed together for the measurements.
- Measure from pump flange/transmission housing (arrow) to 3459 with depth gauge.
Dimension a = Height of 3459 in mm - measured value
Example:
| Height of 3459 | = | 60.0 mm |
| - Measured value | = | - 32.7 mm |
| Calculated value a | = | 27.3 mm |
- Note calculated value a.
- Remove 3459.
- Remove retaining ring.