Work sequence
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Jetta, 2002 Volkswagen GTI, 2001 Volkswagen Jetta, 2001 Volkswagen GTI, and 2000 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Connect Scan Tool (ST) VAG 1551 or mobile Scan Tool (ST) VAG 1552.
- Switch ignition on and select Motronic Engine Control Module (ECM) J220 by pressing buttons - 0 - and - 1 - to insert "Engine Electronics" address word 01 → Scan Tool (ST) VAG 1551 , connecting and selecting functions .
Indicated on display
| Rapid data transfer HELP Select function XX |
- Operate scan tool taking into account information on display.
- Press buttons - 0 - and - 3 - to select "Output Diagnostic Test Mode" function 03.
Indicated on display
| Rapid data transfer Q 03 - Output Diagnostic Test Mode |