Work sequence
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Jetta, 2002 Volkswagen GTI, 2001 Volkswagen Jetta, 2001 Volkswagen GTI, and 2000 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Connect vehicle diagnostic, testing and information system VAS 5051 using diagnostic cable VAS 5051/1 or diagnostic cable VAS 5051/3 as follows:
- Connect diagnostic cable harness connector to Data Link Connector (DLC).
- Depending upon desired function, switch ignition on or start engine → table.
NOTE:
- In "Basic Setting" function 04 through "Read Measuring Value Block" function 08, the display fields will be listed from top to bottom.
- If the display does not indicate what is described in the test sequence: VAS 5051 vehicle diagnostic, testing and information system operating instructions