Work sequence

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Connect Scan Tool (ST) VAS5051 using adaptor cable VAS5051/1 or VAS5051 /3 as follows:

Fig 1: Connecting Scan Tool VAS5051 using adaptor cable VAS5051/1 To Data Link Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Push adaptor cable into Data Link Connector (DLC).
Depending on function: Turn on ignition or Start engine: Selectable functions, when using Scan Tools (ST) VAG1551 /1552 or VAS5051 , Table "Selectable functions".

NOTE:

In the functions 04 - Basic setting/08 - Read data block, the display zones will be listed from top to bottom.
If the display does not indicate as described in the work sequence: Operating instructions for Vehicle Diagnosis, Testing and Information System VAS5051.