LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI VR6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (1.9L - Fuel Injection Glow Plug, Engine Code: ALH (A4 Platform)) >> 23 Diesel Fuel Injection >> Diesel direct injection system, servicing >> Injectors, removing and installing >> Notes

Injectors, removing and installing: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Volkswagen Jetta, 2001 Volkswagen Golf, 2000 Volkswagen Jetta, 2000 Volkswagen Golf, and 1999 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Faulty injectors can cause the following malfunctions:
  • Engine runs rough
  • Diesel knock
  • Knocking in one or more cylinders
  • Engine overheating
  • Loss of power
  • Excessive black smoke
  • Increased fuel consumption
  • Excessive blue smoke when starting from cold

Faulty injectors can be located by loosening the high pressure line union on each injector in turn, with engine running at a fast idling speed. If the engine speed remains constant after loosening a line union, this indicates a faulty injector.

Special tools, testers and auxiliary items required 

Fig 1: Torque Wrench V.A.G. 1331 (5 To 50 Nm)
GW00000113Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 2: Injector Line Wrench 3035
GW00001071Courtesy of VOLKSWAGEN UNITED STATES, INC.