Injection timing device cover gasket, replacing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Volkswagen Jetta, 2001 Volkswagen Golf, 2000 Volkswagen Jetta, 2000 Volkswagen Golf, and 1999 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Place a clean cloth under injection pump.

Fig 1: Exploded View Of Cover Screws, Cover, Gasket & Shims

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove cover screws - 1 - with commercially available key for Torx socket head screws, e.g. Hazet 2115-T30.
Remove cover - 2 - and thoroughly clean.
Replace gasket - 3 - and install cover - 2 - with existing shims - 4 -.
Tighten cover securing screws - 1 -.

Tightening torque: 12 Nm