Work sequence

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Volkswagen Jetta, 2001 Volkswagen Golf, 2000 Volkswagen Jetta, 2000 Volkswagen Golf, and 1999 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Connect Scan Tool (ST) VAS 5051 using adaptor cable VAS 5051/1 or VAS 5051/3 as follows:

Fig 1: VAS 5051/1 Diagnostic Cable

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Push adaptor cable into Data Link Connector (DLC).
Depending on function:
Turn on ignition.
Start engine , Table "Selectable functions".

NOTE:

In functions 04 - Basic setting 08 - Read data block, display zones will be listed from top to bottom.
If display does not indicate as described in work sequence: