Work sequence
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Jetta, 2002 Volkswagen GTI, 2001 Volkswagen Jetta, 2001 Volkswagen GTI, and 2000 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Remove sound insulation: Refer to NOISE INSULATION (GASOLINE ENGINES), ASSEMBLY OVERVIEW or NOISE INSULATION (DIESEL ENGINES), ASSEMBLY OVERVIEW
- Pull vacuum hose off combination valve on Secondary Air Injection (AIR) Solenoid Valve N112
Location: Refer to FUEL INJECTION, SERVICING
- Connect Manual vacuum pump VAG 1390 on vacuum hose to combination valve.
NOTE:
- Do not use compressed air in the following test!
- Remove intake hose to combination valve on top of air filter - arrow - and blow in with low pressure.
Combination valve must be closed.
- Start hand pump.
Combination valve should open.
If the combination valve does not open:
- Replace combination valve, refer to Combination valve, removing and installing .