LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI VR6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (2.8L - Engine Mechanical - AFP (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Engine, disassembling and assembling >> Valve timing, setting (Installing timing chains) >> Locking vibration damper in position

Locking vibration damper in position

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Jetta, 2002 Volkswagen GTI, 2001 Volkswagen Jetta, 2001 Volkswagen GTI, and 2000 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vibration Damper Locked In Position With Counter Hold 3406
GW00000804Courtesy of VOLKSWAGEN UNITED STATES, INC.

To loosen and tighten the mounting bolt, lock vibration damper in position with counter hold 3406.

NOTE:
  • The mounting bolt for the vibration damper must be replaced.
scientia non olet · About LEMON Manuals