Table of shims for drive pinion and input gear

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.

Determining Shim Thickness: Drive Pinion And Input Gear

Measured thickness -mm	Shim thickness -mm
0.975 - 0.999	1.000
1.000 - 1.024	1.025
1.025 - 1.049	1.050
1.050 - 1.074	1.075
1.075 - 1.099	1.100
1.100 - 1.124	1.125
1.125 - 1.149	1.150
1.150 - 1.174	1.175
1.175 - 1.199	1.200
1.200 - 1.224	1.225
1.225 - 1.249	1.250
1.250 - 1.274	1.275
1.275 - 1.299	1.300
1.300 - 1.324	1.325
1.325 - 1.349	1.350
1.350 - 1.374	1.375
1.375 - 1.399	1.400
1.400 - 1.424	1.425
1.425 - 1.449	1.450
1.450 - 1.474	1.475
1.475 - 1.499	1.500
1.500 - 1.524	1.525
1.525 - 1.549	1.550
1.550 - 1.574	1.575
1.575 - 1.599	1.600
1.600 - 1.624	1.625
1.625 - 1.649	1.650
1.650 - 1.674	1.675
1.675 - 1.699	1.700
1.700 - 1.724	1.725
1.725 - 1.749	1.750
1.750 - 1.774	1.775
1.775 - 1.799	1.800
1.800 - 1.824	1.825
1.825 - 1.849	1.850
1.850 - 1.874	1.875
1.875 - 1.899	1.900
1.900 - 1.924	1.925
1.925 - 1.949	1.950
1.950 - 1.974	1.975
1.975 - 1.999	2.000
2.000 - 2.024	2.025
2.025 - 2.049	2.050
2.050 - 2.074	2.075
2.075 - 2.099	2.100
2.100 - 2.124	2.125
2.125 - 2.149	2.150
2.150 - 1.274	2.175
2.175 - 2.199	2.200
2.200 - 2.224	2.225
2.225 - 2.249	2.250
2.250 - 2.274	2.275
2.275 - 2.299	2.300
2.230 - 2.324	2.325
2.325 - 2.349	2.350
2.350 - 2.374	2.375
2.375 - 2.399	2.400
2.400 - 2.424	2.425
2.425 - 2.449	2.450
2.450 - 2.474	2.475
2.475 - 2.499	2.500
2.500 - 2.524	2.525
2.525 - 2.549	2.550
2.550 - 2.574	2.575
2.575 - 2.599	2.600
2.600 - 2.624	2.625
2.625 - 2.649	2.650
2.650 - 2.674	2.675
2.675 - 2.700	2.700

NOTE:

Different tolerances enable the required shim thickness to be measured precisely.
Part numbers for shims parts catalog microfiche.