Notes on replacing instrument cluster

• Do not disassemble instrument cluster.
• All control and warning lights are Light Emitting Diodes (LEDs) which cannot be serviced separately. LED malfunctions require replacement of instrument cluster.
• Instrument clusters contain no field serviceable components. Malfunctions require replacement of instrument cluster.
• When the replacement of a malfunctioning instrument cluster is necessary, follow exchange part procedures.

• Complete report form and return together with inst. cluster.
• Use the original packaging from the new cluster when returning modules.
• The odometer reading must be matched to the new/exchange instrument cluster.

Through m.y. 1999:

Refer to 01 ON BOARD DIAGNOSTIC (OBD) .

From m.y. 2000:

Refer to VAS 5051/5052 Vehicle Diagnostic Testing and Information System in mode "Guided Fault Finding"