High-mount brake light - Jetta Wagon, removing and installing: Removing

• Remove upper and lower rear lid trim

Refer to 70 - INTERIOR TRIM

Fig 1: High-Mount Brake Light Screws (Jetta Wagon)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws -arrows-.
• Disconnect electrical connector.

Fig 2: High-Mount Brake Light Bulb Housing (Jetta Wagon)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip bulb housing at both short sides -arrow-.

Fig 3: High-Mount Brake Light Bulb Holder (Jetta Wagon)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Unclip bulb holder on both long sides -arrows-.