LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Removing the Synchronizer and 3rd/4th Gear Locking Collar, 2nd, 3rd and 4th Gears with the Needle Bearing Sleeve and Output Shaft

Removing the Synchronizer and 3rd/4th Gear Locking Collar, 2nd, 3rd and 4th Gears with the Needle Bearing Sleeve and Output Shaft

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Off 3rd And 4th Gear Synchro-Hub/Locking Collar, 2nd, 3rd And 4th Gears With Transmission Housing Needle Roller Bearing Sleeve
GWWV35-1222Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A -

Separating tool 22 to 115 mm, for example, 17/2

B -

M10 x 20, 17 mm bolt

NOTE:

Support the separating tool so that the 1st/2nd gear locking collar does not come off as well.

scientia non olet · About LEMON Manuals