LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Removing the Bearing Inner Race/Large Tapered Roller Bearing

Removing the Bearing Inner Race/Large Tapered Roller Bearing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pulling Off Large Inner Race/Tapered Roller Bearing
GWWV35-1132Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-A- vice protectors

-- Before installing puller, insert a bolt M10 x 20 in the bore of the output shaft.

scientia non olet · About LEMON Manuals