LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2004 >> GTI Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Installing the Sleeve for the Needle Bearing/Output Shaft

Installing the Sleeve for the Needle Bearing/Output Shaft

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing On Sleeve For Output Shaft Needle Bearing
GWWN35-0023Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals