Charge Air Regulation Vacuum Diaphragm

WARNING: This page is about a different car, the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2009 Volkswagen GLI, 2008 Volkswagen Jetta, and 2008 Volkswagen GLI. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Wrench (5-50 Nm) V.A.G 1331

Removing

-- Remove the turbocharger. Refer to TURBOCHARGER .

-- Remove the circlip -arrow- from the vacuum diaphragm linkage.

Fig 1: Identifying Circlip -Arrow- From Vacuum Diaphragm Linkage

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the vacuum line -2- from the vacuum diaphragm -1-.

Fig 2: Identifying Vacuum Diaphragm Bolts -Arrows- And Diaphragm -1- From Turbocharger

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the vacuum diaphragm bolts -arrows- and diaphragm -1- from the turbocharger.

Installing

Install in reverse order of removal.

Tightening specifications, refer to CHARGE AIR REGULATION VACUUM DIAPHRAGM .