General Information: Turbocharger

WARNING: This page is about a different car, the 2010 Volkswagen Jetta and 2009 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Various hose connections are secured.

The charge air system must be properly sealed.

Always replace self-locking nuts, seals, gaskets and clamps.

Fill with engine oil before installing the turbocharger oil supply line to the connection.

After installing the turbocharger, let the engine run at idle for approximately 1 minute. This ensures the turbocharger will have an adequate supply of oil.

CAUTION:

Follow the safety precautions when working on the charge air system and turbocharger. Refer to SAFETY PRECAUTIONS .
Observe the rules for cleanliness. Refer to CLEAN WORKING CONDITIONS .

Always follow these instructions before and during work.