Evaluating display group number 013

Display zone	Description	Display	Corrective action
1	RLR button and RL handle 1)2)	not operated RLR, RL, implausible	Visual check of wiring Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display If the display does not change when operating, repair malfunction or replace relevant component Erase DTC memory Perform functional check Check memory again
2	Rear, first detent 3)	open, closed, not installed
3	Instrument illumination	mv = 0...100% (in 16 steps)

1) Rear lid remote opening button and rear lid handle

2) Fault recorded if operated for longer than 10 seconds

3) Lock rotary latch must be engaged in first detent