LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2003 >> Jetta GLI >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Removing the Locking Collar with the Synchronizer Hub and Bearing Mount

Removing the Locking Collar with the Synchronizer Hub and Bearing Mount

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Off Locking Collar With Synchronizer Hub And Bearing Mount
GWWN35-0325Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the lock ring -arrow- beforehand.

scientia non olet · About LEMON Manuals