LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2003 >> Jetta GLI >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Installing the Synchronizer Hub with Locking Collar for 3rd and 4th Gears

Installing the Synchronizer Hub with Locking Collar for 3rd and 4th Gears

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing On 3rd And 4th Gear Synchro-Hub With Locking Collar Using Special Tools VW412, VW519, VW402 & VW447H
GWWV35-1147Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals