LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2003 >> Jetta GLI >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Gears, Shafts - Manual Transmission 0A4 (Sedan) (A5 Platform)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Installing the Locking Collar/Synchronizer Hub for 1st and 2nd Gears

Installing the Locking Collar/Synchronizer Hub for 1st and 2nd Gears

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing On Locking Collar/Synchronizer Hub For 1st And 2nd Gear
GWWN35-0366Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Turn the synchronizer ring so that the grooves line up with the locking pieces.

scientia non olet · About LEMON Manuals