Oil pump, removing and installing

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove oil pan and baffle plate. Refer to Oil pan, removing and installing .

Fig 1: Identifying Oil Pump & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolt -2-.
Pull off chain sprocket from oil pump shaft.
Remove bolts -1- and -3- and remove oil pump.

Installing

Install in reverse order and note the following:

Install dowel sleeves into upper part of oil pump.

Installed position of oil pump shaft/chain sprocket: Can only be installed in one position

Install oil pan and baffle plate. Refer to Oil pan, removing and installing .