LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2003 >> GTI Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 13 Engine - Crankshaft, Cylinder block >> Piston and connecting rod, disassembling and assembling >> Assembly overview >> Checking ring to groove clearance

Checking ring to groove clearance

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Ring To Groove Clearance
GW00000053Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools and equipment 

Work sequence 

Piston ring    Ring to groove clearance 
    New Wear limit
Compression rings mm 0.06 to 0.09 0.20
Oil scraper ring mm 0.03 to 0.06 0.15
scientia non olet · About LEMON Manuals