LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2003 >> GTI Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (2.5L - Crankshaft, Cylinder Block - Engine Code(S): BGP, BGQ, CBTA & CBUA (Sedan) (A5 Platform)) >> 13 Crankshaft, Cylinder Block >> Description And Operation >> Accessory Drive And Cylinder Block Overviews >> Engine, Front And Side

Engine, Front And Side

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 Volkswagen Jetta, 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, and 2006 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Engine Front/Side Overview
GWWM13-0195Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Cylinder Block 
  2. Gasket 
    • Always replace.
  3. Vacuum Pump, for the Brake Booster 
  4. Bracket 
  5. Bolt 
    • 10 Nm
  6. Oil Filter Bracket 
  7. Bolt 
    • 25 Nm
  8. Bolt 
    • 10 Nm
  9. Bolt 
    • 10 Nm
  10. Thermostat Housing 
    • With the thermostat and coolant pipe.
  11. Bolt 
    • 10 Nm
  12. Intake Manifold Support 
    • For engines with a Secondary Air Injection (AIR) system only.
  13. Bolt 
    • 25 Nm
  14. Bolt 
    • 10 Nm
  15. Bolt 
    • 25 Nm
  16. Accessory Bracket 
  17. Bolt 
    • 40 Nm + 90° (1/4) additional turn.
    • Always replace.
  18. Engine Mount 
  19. Guide Tube 
    • For the oil dipstick.
  20. Transport Strap 
    • Not needed for service.
  21. Bolt 
    • 25 Nm
  22. Bolt 
    • 10 Nm
  23. Coolant Pump 
    • With a integrated silicone seal for the cylinder block seal.
    • Removing and installing, refer to COOLANT PUMP .