LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2003 >> GTI Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (1.9L - Cylinder Head, VALVETRAIN - Engine Code(S): BKC, BLS, BRM & BXE (A5 Platform)) >> 15 Engine - Cylinder Head, VALVETRAIN >> General Information >> Bearing Caps 1 And 5, Sealing Separating Surfaces

Bearing Caps 1 And 5, Sealing Separating Surfaces

WARNING: This page is about a different car, the 2006 Volkswagen Jetta and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Seal separating surfaces of bearing caps 1 and 5 with sealant, black AMV 174 004 01

Fig 1: Identifying Sealant
GWWN15-0270Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Apply sealant, black AMV 174 004 01 thinly and evenly on the surfaces -1-.

NOTE:

Make sure that no sealant enters the grooves -arrows-.

scientia non olet · About LEMON Manuals