Relay plate and 13 position relay carrier, removing and installing

Removing 

• Disconnect battery. Refer to Battery with fastened fuse holder, disconnecting and reconnecting  .
• Unclip instrument panel side trim.
• Remove driver's side lower instrument panel trim.

Refer to 70 - INTERIOR TRIM

Fig 1: Identifying Relay Carrier, Central Electric, Screws & Connections

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws -C- (2 Nm)
• Disconnect all screwed connections -D- as necessary.
• Take out central electric -B- and relay carrier -A- out downward.

Installing 

Install in reverse order of removal, noting the following:

• Reconnect battery. Refer to Battery with fastened fuse holder, disconnecting and reconnecting  .