Front axle camber, adjusting

If a value lies outside the tolerances, check trim height and balance if necessary.

Only by moving the subframe is it possible to change the camber slightly.

Fig 1: Locating Subframe Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Loosen bolts - 1  - and - 2  -.
• Move subframe to equalize camber on both sides.

Check caster; caster can also change when moving subframe. 

Check the caster angle afterward. 

Fig 2: Locating Subframe Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Secure the subframe with new bolts.