Engine code AEG

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Firing Order & Cylinder Identification (Engine Code AEG)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Ignition System Components (Engine Code AEG)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - 10 Nm

2 - Ignition cable

4 to 8 k Ω
With suppression connector and spark plug connector
Disconnect spark plug connector with T10112.

3 - Spark plug, 25 Nm

Remove and install with 3122 B
Type and electrode gap. Refer to Test data, spark plugs

4 - 20 Nm

Tightening torque influences function of knock sensor

5 - Knock Sensor (KS) 2 -G66-

Gold plated contacts

6 - Connector

Brown, 2-pin
For Knock Sensor (KS) 2 -G66-
Gold plated contacts

7 - Knock Sensor (KS) 1 -G61-

Gold plated contacts

8 - Connector

Black, 2-pin
For Knock Sensor (KS) 1 -G61-
Gold plated contacts

9 - Camshaft Position (CMP) Sensor -G40-

Location. Refer to Engine code AEG item -29-

10 - Connector

Black, 3-pin
For Camshaft Position (CMP) Sensor -G40-

11 - Connector

Black, 4-pin

12 - Ignition coils (-N-, -N128-)

With ignition cable identification: A = Cylinder 1, B = Cylinder 2, C = Cylinder 3, D = Cylinder 4
With Power output stage -N122-
Location. Refer to Engine code AEG item -11-