LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2002 >> GTI Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (2.0L - Engine Mechanical - AEG, AVH, AZG, BBW, BEV (A4 Platform)) >> 15 Engine - Cylinder head, Valvetrain >> Valve gear, servicing >> Valve seats, reworking >> Reworking intake valve seat

Reworking intake valve seat

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2005 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Dimension    Intake valve seat 
diameter a mm 39.2
b mm max. permissible reworking dimension
c mm 1.8 to 2.2
Z   Cylinder head lower edge
45 °   Valve seat angle
30 °   Upper correction angle
Fig 1: Identifying Exhaust Valve Seat Measurements
GW00000106Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals